EnquiryLet’s build together
All stories
INOX Satin Silent EZ Up and Down two tier overhead storage unit lowered from a wall cabinet, holding cans and bottles
Kitchen hardware / A closer look
Satin Series — Individual Product3 min read

Satin Silent EZ Up and Down: Bringing Overhead Storage Down to Counter Height

Bring overhead storage within reach with INOX's Satin Silent EZ Up and Down. Explore its controlled motion, weight adjustment, and cabinet planning requirements.

The Shelf Above the One You Can Reach

In many kitchens, the cabinet above the main wall units holds the overflow, drinks, bulk packaged goods, extra serveware, and reaching it comfortably is rarely part of the original design. This top tier of storage is usually the last to be planned and the first to be forgotten, which means it often ends up holding items that are used rarely simply because using them requires more effort than they are worth.

How the Unit Lowers Its Load

The Satin Silent EZ Up and Down brings its full shelf down to a comfortable height with a single pull, then returns it to storage on the same soft close, controlled motion, removing the need for a step stool entirely. The descent and return both happen along a guided arm path, meaning the shelf does not tilt or wobble as it moves, which matters when it is carrying a genuinely loaded set of items rather than sitting empty.

Built With Weight Adjustment

Because this unit is routinely loaded with genuinely heavy items, bottled drinks and canned goods among them, its weight adjustment feature matters, allowing the descent to feel consistent whether the shelf is lightly or fully loaded. Without this adjustment, a unit calibrated for a light load would descend too quickly under a heavier one, while a unit calibrated for heavy use would feel stiff and effortful when only lightly loaded.

Sized for 600 and 900 Millimetre Cabinets

Available at both widths, with a cabinet height requirement of 700 to 720 millimetres, the unit needs that clearance built into the kitchen plan from the outset rather than added after the cabinetry is finalised. This height requirement is one of the more common reasons premium fittings like this one get left out of a kitchen plan, simply because the cabinet dimensions were decided before the fitting was selected, rather than the other way around.

Why the Satin Finish Matters Here

Because this fitting sits at the top of the cabinet run, often visible from across the kitchen even when closed, its satin finish needs to read consistently with the rest of the kitchen's hardware, rather than standing out as an obviously different material or tone.

Planning This Fitting Into a New Kitchen

For anyone designing a kitchen from scratch, this is one of the clearer arguments for finalising hardware choices before cabinet carpentry begins, since retrofitting the required height allowance into an already built cabinet run is far more disruptive than specifying it correctly the first time.

A Fitting That Changes How Much of the Kitchen Gets Used

Once this shelf is genuinely easy to reach, it stops being overflow storage and starts being used the way any other cabinet is, which is really the entire point of specifying it in the first place. A kitchen with this fitting installed effectively gains an additional, fully functional storage tier, rather than carrying one that exists on paper but is rarely used in practice.

The INOX perspective

Considered details.
A quieter everyday.

Find the right hardware for your space
Join the conversation

Leave a comment

Your email address will not be published. Required fields are marked *. Comments are submitted for review.